AquaSPArkle Spa PH Plus 1kg

£9.40
Information

Test the pH of your spa water and if it is below 7.2, use AquaSPArkle pH Plus to raise it.

  • Granular product for raising Spa water pH
  • Ideal pH range is 7.2 to 7.6
Maintaining a correct pH balance in Spa water is important, as it ensures that your sanitiser works correctly keeping your Spa clean and safe.  An incorrect pH balance can also lead to bather discomfort (stinging eyes), and can also damage your Spa equipment such as pumps and heaters.

Application Instructions 
  1. Pre-dissolve the product in a clean plastic container at a maximum rate of 10g of product per 0.2 gallons (1ltr) of clean warm water. Stir well to ensure product is fully dissolved. Carefully add the resulting solution to the spa whilst the pump(s) are turned “on”. 
  2. After a minimum of 30 minutes, recheck the pH level and if necessary repeat the treatment until the ideal pH is established.

Dose Rates
Litres Gallons Dose Rate
1,000 220 11g
1,500 330 17g

Always read the instructions on the container prior to use.

Specifications
  • MPN:
    PHPLUS1AS
  • GTIN:
    5060149800904
  • Weight:
    1kg
  • Brand:
    AquaSparkle
  • Condition:
    New